BMW GT1 balance rod knowledge introduced

Car balance lever is in accordance with the purpose and function of demands, the following points, namely:1 under the front wheel swing arm the balanced lever (the original car essential accessories)- Designed and installed separately connected to the front axle and front wheel, the main role is responsible for the control of the front wheel of the medial and lateral inclination;2. Direction before the beam balance lever (the original car essential accessories)- Design hem arm mounted on both sides of the front wheel, the overall symmetry control the direction of the front wheels. The main role is responsible for the front wheel of anteversion, to maintain the direction of tracking ability of the wheels;3. The front suspension Tata top balance Trolley (Hong Kong and Macao commonly known: the top bar. Optional pieces)- Designed and installed in the front shock absorber overhead position. The main role is enhanced cabin with front body rigidity to counteract centrifugal horizontal torque caused by the frame deformation (severe deformation can cause the top of the tower tear), improve vehicle cornering ability, improve cornering speed, reducing the body by the centrifugal force generated by the roll angle;Before the end of beams balanced trolley (commonly known as: before the end of the optional pieces)- Designed and installed in front of the front axle and the frame chassis joints. The main role is to enhance the strength of the connection of the front bottom beam (front axle) and the chassis, reducing the front axle displacement deformation distortion caused by the centrifugal force with the body, and its main role is also to improve the cornering performance;5. Rear suspension overhead balance lever (commonly known: after the top bar. Optional pieces)- Designed and installed on the rear shock tower top position. The main role is to enhance the strength of the boot of the car, reducing the rear compartment due to the centrifugal force caused by the lateral distortions, reduce car tail roll when cornering, to improve vehicle cornering performance;Rear axle suspension to to enhance balance lever (commonly known: after the end of optional items)- Designed and installed at the connection position behind the rear axle and frame chassis. The main role is to enhance the strength of the connection of the rear axle and the frame;Frame (body) chassis enhancements balance lever (components)- Designed and installed in the middle of the frame chassis, the main role is to strengthen the overall frame chassis rigidity.Depending on the vehicle factory design, the frame structure is different, some have been omitted, and some other structure to replace.Family vehicles usually do not pay attention to the equipment, sports vehicles, is rather more not less.In addition, the body in order to enhance the rigidity of the body as a whole and professionally converted (cockpit) anti-roll support with side door strengthening steel beams, are highly specialized athletic essential modification project.Different models of chassis design, usually not free to substitute other models of accessories.After serious collisions, the balance rod deformed and its components, should all be replaced, rather than the heating correction can be fully restored, otherwise, even if the correction reset, but the material itself changes also affect the high speed security and stability.

http://www.obd2center.fr/