Fast driving methods through corners

1 by the general a curve, select the first outside of the inside and then outside turn route:
Both want to quickly turn through the corners you do not want to produce too much centrifugal force will turn the corner Road must make full use of the width of the road, try to tend to the straight line sweeping turn, and so, in turn before the start of into the corner against the outside of the corners to the middle when traveling against the inside of the curve, that is the top of the arc in the corners should be close to the corners of the inside running over bend the top of the key, and then cut back to the outside of the corners and exit corners against the outside of the corners, you want to select the "outside - inside - outside turn route when cornering.
2 master the the "slow CNPC faster cornering principle:
Not yet into the corner, and still keep straight, it should be the first step on the brakes so the car deceleration, if the bend is more anxious, you should further reduce the speed, at the same time need to first drop a gear; low speed into the corner, first select turn routes and correction direction, then step on the gas, because the the vehicle acceleration causes the center of gravity moved to the front slightly raised, the steering wheel becomes lighter, the rear wheels will also appear a little horizontal sliding, the car can be as simple as turning; When you see the end of the curve, the steering wheel back positive, and in recognition of road safety, fuel door fast out of the corners on it.
3, through the blind corners Methods:
Blind corners is to look at the less than export corners. Traveling on blind corners, see less than bend the end of the traffic situation, you must first reduce the speed driving, and not according to the way of ordinary corners. In order to avoid the accident to the vehicle must be traveling against the edge of the road, through the left curve, the car should be traveling along the outside of the corners and through the right corner, the car should be along the curve within side driving, once you can see the corners exports lane change, correction direction, according to the first outside of the inside and then outside, refueling door accelerate away from the corners.
4, through the method of the composite curve:
The composite curve is a curve composed by two or more corners. Through complex corners, the focus is to ensure that the last corner, in order to leave the corners in the final bend at the exit. First, to reduce the speed into the first corner of imports, according to the first outside of the inside and then outside after traveling on each corner, during which you can add a little throttle through the last corner, Once you see the export curve can correct direction, full acceleration, a straight line to leave the corners.